Lane guiding (web guide control) occurs as a result of incorrect wrapping of the rolled material or due to mechanical problems, when traveling the product to the left or right, problems occur. This results in wastage, decreased yield or poor quality. To prevent this problem, the web control system is activated. The Unity Web Control system follows the edge of the product, allowing the product to unwind or wrap in the same flatness. It is a highly innovative system. Mechanical assembly is quite simple. It provides quality, speed and minimum waste rate. It provides high precision with stepper motor. It can be used with ultrasonic fork sensor, optical fork sensor or color sensor depending on the type of material. We have special production solutions according to Unity Web Guide control system, product type, width and machine condition.

The edge controller corrects the edge of the spool that is defective during unwinding and rewinding of the rolled coil. Edge control is done by moving the bobbin to the left or right according to the information coming from the sensor during winding or unwinding of the product. In cases where this process is not mechanically possible in the edge control, the direction of the product is changed by changing the direction of the product with the ribbon guidance system.

Adaptation of the edge control system to the machine is quite simple. The edge control system gives the machine operator great convenience and time. The edge control system generally consists of edge control device, edge control sensor, edge control motor, driver and limit switches. As an engine in edge control system; Ac Motor, Servo Motor, Step Motor can be used. The edge control system can also be adapted to hydraulic or pneumatic systems. Color sensor (contrast sensor), ultrasonic fork sensor or optical fork sensor can be used as sensors in the edge control system. Edge control system Edge control can be provided with an accuracy of 0.01 mm.

AREAS OF USE

Diaper Production Machines

Wound Band Production Machines

Label Printing Machines
 

FEATURES

Microprocessor Based

High Accuracy

Automatic Centering (Center) Feature

Constant Speed, Sensor Dependent and Line Speed Ability to Work

Ability to use mechanical or electronic swich for limit stop

Turkish / English Language Option

To Control the Release of the Product

Easy Operation And Easy Assembly

Being able to give a contact at the end of the determined period when the limit comes to the swiches

Ability to Work Synchronously to Line Speed

Viewing Malfunctions on the Screen

Keeping the Values in Memory When Power Is Cut

Viewing the Edge of Product Edge Disorder on Screen

SPECIFICATIONS

Size: 177 * 113 * 125 MM (G * Y * D)

Board Section: 157 * 102 MM (G * Y)

Display: 4 * 20 LCD Screen

Input Supply: 230V + 10% -10% 50-60 Hz

Step Input Supply: DC 24 V 5a

ENTRİES:

Sensor Input (0-5V DC)

External Start Input

External Speed Information Input (0-10V)

Manual Right Left Entry

EXİTS:

0-10 V DC Analog Output

3A Stepper Motor Output
Digital Direction Contact Output

Digital Fault Output

PROTECTION:

End of Limit Protections

Operating Temperature: 0-50 Degrees
 

WEIGHT:

950 GR

SENSOR:

0-5V Analog Color Sensor

Fork Optical And Ultrasonic Sensor