The unity edge controller (uec01) is designed to perform precise edge - color tracking and control with the microprocessor. The edge controller corrects the edge of the coil that is broken during the unwinding and winding of the coil. The edge control process is done by moving the coil from right to left according to the information from the sensor during the winding or dissolving of the product. In cases where this process is not mechanically possible, edge control is provided by changing the direction of the product with the lane guidance system. Adapting the edge control system to the machine is quite simple. It saves the machine operator great convenience and time. In general, the system consists of edge controller, edge control sensor, edge control motor, driver and limit switches. Ac motor, servo motor, step motor can be used as a motor. It can also be adapted to hydraulic or pneumatic systems. Color sensor ( contrast sensor ), ultrasonic fork sensor, or optical fork sensor can be used as a sensor. Edge control can be achieved with 0.01 mm precision.

Ribbon routing system (web guide control)

lane guidance (web guide control) as a result of improper wrapping of the material in the roll or due to mechanical problems, problems occur when the product is being processed. This leads to fire, decrease in efficiency or decrease in quality. To avoid this problem, the web control system is activated. The unity web control system follows the edge of the product to unravel or wrap the product in the same flat. It is a highly innovative system. Mechanical assembly is quite simple. It provides quality, speed and minimum waste rate. Stepper motor provides high sensitivity. Depending on the type of material, it can be used with ultrasonic fork sensor, optical fork sensor or color sensor. Unity web guide control system; we have special production solutions based on product type, width and condition of the machine.

The edge controller corrects the edge of the coil that is broken during the roll-out and winding of the coil. The edge control process is done by moving the coil from right to left according to the information from the sensor during the winding or dissolving of the product. In cases where this process is not mechanically possible in the edge control, the direction of the product is changed with the lane guidance system to provide edge control.

Adapting the edge control system to the machine is quite simple. Edge control system saves the machine operator great convenience and time. The edge control system generally consists of edge controller, edge control sensor, edge control motor, driver and limit swich.

Ac motor, servo motor, step motor can be used as a motor in the edge control system.
The edge control system can also be adapted to hydraulic or pneumatic systems. In the edge control system, color sensor(contrast sensor), ultrasonic fork sensor, or optical fork sensor can be used as a sensor. Edge control system edge control can be achieved with 0.01 mm precision.

Areas of use
diaper production machines
band-aid manufacturing machines
label printing machines

features
microprocessor based
high sensitivity
auto center feature
working with fixed speed, sensor and line speed
using mechanical or electronic swich for limit stopping
turkish / english language option
to be able to control the release of the product
easy operation and easy installation
contact at the end of the specified time when the limit is swichlere
synchronous operation to line speed
to be able to see failures from the screen
to be able to keep values in memory when energy is lost
to be able to see product edge disorder status from the screen

specifications
size: 177*113*125 mm (g * y * d)
panel section: 157 * 102 mm (g * y)
display: 4 * 20 lcd display
input supply: 230v + 10% - 10% 50-60 hz
step input feed: dc 24v 5a
inputs: sensor input (0-5v dc))
external start input
external speed information input (0-10v))
manual right left input
outputs: 0-10 v dc analog output
3a step motor output
digital directional contact output
digital fault output
protection: limit end guards
operating temperature: 0-50 degrees
weight: 950 g
sensor: 0-5v analog color sensor, fork optical and ultrasonic sensor